1. From the Available fax lines list select the first available fax line number.
2. From the Device type list select the Brooktrout entry with the number of channels you licensed from Cantata Technology.
3. In the Physical line/port list, select the channel that you want to use with this fax line. For example, if you want to use channel 1 select
Brooktrout channel 1 (BROOKTROUT1).
4. Click OK to display the device/line properties dialog box.
7. If you plan to use fax routing to route faxes to individual users based on the DID number, click on the Advanced tab and then select the
Number of DTMF/DID digits to capture check box. The number of digits should be set to the size of the range of numbers you will be capturing. (i.e. For a range of 0-99 you should capture two digits. For a range of 0000-5000 you would capture 4 digits).
8. Configure ‘Line options’ and ‘Advanced options’ from the Line options and
Advanced tabs. A description of these options can be found further on in this manual. Click
OK to add the line.
NOTE: After making any changes to the GFI FAXmaker Lines/Devices configuration make sure to restart the GFI FAXmaker FAX Server service for the changes to take effect. Then check the Fax Server Monitor to make sure that the lines have been initialized.
