Table of ContentsPreviousNextIndex

Configuring MSN routing

Before you can add MSN routes, you have to enter the MSN numbers in the ISDN card Device tab.

To do this:

  1. Right-click on the Devices\Lines Configuration node, select properties. A dialog with the available lines will appear.
  2. Select the lines, which use the ISDN card and double-click. The Device properties will appear. In the main Device tab, enter the MSN numbers that you want to be answered.

    3. Add MSN numbers to the device first

Entering the MSN numbers is required, otherwise the ISDN card will not pick up any incoming phone calls. If you use the ISDN line only for the fax server, you can enter all the MSN numbers available on the ISDN line, so as to create the maximum possible MSN routes.

Adding MSN routes

To Add a new MSN route

1. Right click on the Routing > MSN node, and select 'New MSN route'

Creating a new MSN route

2. Now select from the list of available MSN numbers and click OK. The MSN number will appear in the right pane of the FAXmaker configuration.

3. Now double-click on the MSN number in the right pane. This will bring up the MSN route properties. In the users tab, select to which user(s) the fax must be routed if the fax is received on this MSN number.

4. Optionally configure a printer on which the fax must be auto printed if received on this route. To do this, select the appropriate printer in the printers tab. (Note that you must have configured the printer first in the printers node)

Table of ContentsPreviousNextIndex