Sending options

To configure fax sending options, right-click on the Sending options node and select properties. You can configure the following options:

Figure 5 Sending properties

Enhance fax image when sending low resolution faxes: By enabling this option, the quality of low-resolution faxes is improved.

Use an alternate file format for sent fax report attachments: You can choose that the fax files included in sent fax reports are sent in a different format then the standard fax format. You can select TIF, PDF, GIF, JPG or PNG format.

Auto print outgoing faxes if successful: This option automatically prints all outgoing faxes that are sent successfully. The fax will be printed exactly as it was sent.

Auto print if failed: This option automatically prints all outgoing faxes that fail. The fax will be printed exactly as it was sent.

Auto print fax report if successful: If this option is activated, FAXmaker will print a transmission report and a miniature of the fax after successfully sending a fax. FAXmaker will include 6 fax pages on one printer page (except for the first page as this includes a transmission report and 5 fax pages).

Auto print report if failed: If you select this option, FAXmaker will print a transmission report and a miniature of the fax after an outgoing fax has failed.

When you check one of these Auto print check boxes, the auto print set-up dialog will automatically pop up:

Auto-fit

If you want your faxes to be auto-fitted, select Nearest Size. If you are sure you are only going to receive one fax format/size, you can select that format: A4 only, Letter only or Legal only. If you have chosen Nearest Size, you must set up a printer (this can be the same printer) for each format. If you have chosen one format only, you must set up a printer for that format.

Auto print set-up dialog