Information

This article provides information regarding the Exinda CLI other commands that may be helpful.

NOTE: The following syntax convention is used:

{}: Options are enclosed in braces and are separated by '|'
[]: Optional keywords are enclosed in brackets
<>: User input is required where variables are enclosed in greater-than and less-than symbols

The table below provides some important commands:

Action Description	Command	Parameter Description
To measure TCP (Transmission Control Protocol) / UDP (User Datagram Protocol) bandwidth	`iperf [-s\|-c host]`	This command requires 2 Exinda appliances. One needs to be run as an iperf server; see the -s option. The other needs to be run as an iperf client, which connects to the iperf server; see the -c option.
To send ICMP (Internet Control Message Protocol) echo requests to a specified host	`ping <hostname or ip address of remote host>`	Not Available
To trace the route that packets take to a destination	`traceroute <hostname or ip address of remote host>`	Not Available