Phone Lines icon GFI Support

Articles in this section

Connecting Kerio Operator to SIP.US or SIPTRUNK.COM

Author: Vladyslav Velychko Updated

Overview


You can configure a SIP trunk to dial public phone numbers using SIP.US or SIPTRUNK.COM.


Prerequisites


You need to set up an account at SIP.US or SIPTRUNK.COM and retrieve the following information (available in the control panel at SIP.US or SIPTRUNK.COM):

  • The telephone number or numbers assigned to you
  • Trunk #
  • Password


Process

  1. Log in to the Kerio Operator Administration portal.
  2. Navigate to Configuration > Call Routing.
  3. Click Add SIP interface.

    add_sip_interface.png

  4. Choose New provider and enter your telephone number (use a comma to separate multiple phone numbers). Click Next.

    mceclip0.png

  5. Choose the extension to receive incoming calls. Enter a dial-out prefix if necessary. Click Next.

    sip-us-2.png

  6. Enter the following details: 
    • Domain (gw.sip.us for SIP.US or gw.siptrunk.com for SIPTRUNK.COM)
    • Username (trunk #)
    • Password

      mceclip1.png

  7. Enable the Required to register option. Enable Send email alert on failure if needed. Click Next.
  8. Review your settings and click Finish.

    mceclip2.png


Related Articles

 

Back to top