SummaryManaging which alerts to enable and disable can be done on the System > Setup > Alerts page.
It is possible to modify which Alerts are enabled on the Exinda by browsing to the System > Setup > Alerts tab.
These alerts can be enabled and disabled, as well as choosing whether or not to sent en Email or SNMP trap for the warning.
Below is an example of what the Alerts page will look like by default.
Note: If you'd like to enable the Email and SNMP trap options, ensure that you've already configured the email and SNMP details under the System > Network > Email and System > Setup > SNMP tabs.
If you'd like to clear an existing warning on the appliance you can click the WARNING indication shown at the top of the GUI and then select the Reset button next to the active trigger.