OverviewIf you are seeing significantly more traffic under Monitor-->Interfaces than other graphs, for example control graphs please check the following:
1. Make sure there is this is not caused by the default internal-to-internal ignore. To verify this, when the issue is happening you can disable the ignore internal-to-internal ignore. This is found under:
If this was the case then you should be able to see what traffic is causing the issue and address it accordingly.
2. Gather a tcpdump when the issue is happening to look at what traffic is actually flowing during these times. Some traffic is not reflected on the Exinda like later 2 traffic. So there is a possibility this is layer 2 broadcasts.If this is the case. The captures should give you an idea what device was sending the broadcasts.