Overview
This article provides the quick steps to use the USB drive to recover your Kerio Device Compliance.
Step-By-Step Guide
- Switch off Kerio Control.
- Plug the USB flash drive into one of the USB ports of your Kerio Control.
- Switch on Kerio Control. Wait for applying the kerio-control-rescue script.
- Kerio Control turns off after the factory reset finishes. Turn off Kerio Control Box 3110 and 3120 manually after some time (15 min) of inactivity.
- Switch on Kerio Control.
- Install Kerio Control.
Related Articles:
Preparing A Flash Drive For System Recovery
Confirmation
Your Kerio Control device is now recovered in the USB drive.