Overview

Kerio Control VPN Client is a tool for secure connection into a private network running Kerio Control on its Internet gateway.

This article will guide you on how to install Kerio VPN Client for Debian and Ubuntu Linux.

Prerequisites

# sudo apt-get install debconf openssl

Solution

Installation

To install Kerio Control VPN Client on 32-bit Debian / Ubuntu, execute the following command:

# sudo dpkg -i kerio-control-vpnclient-###-linux.deb

To install Kerio Control VPN Client on 64-bit Debian / Ubuntu, execute the following command:

# sudo dpkg -i kerio-control-vpnclient-###-linux-amd64.deb

Configuration

• Kerio Control VPN Client for Linux supports only one VPN connection at a time.

• During the package installation, a configuration wizard is automatically started. The wizard will ask for

  • the server name/address,
    

  • username,
    

  • password,
    
    

  • automatic detection of the server's certificate fingerprint (for server identity verification).
    

• Alternatively, the server's certificate fingerprint may be entered manually. 

• If you want to change the configuration later, rerun the wizard by executing the following command:

  # sudo dpkg-reconfigure kerio-control-vpnclient

• Alternatively, it is possible to edit the configuration file /etc/kerio-kvc.conf manually.

  # sudo nano /etc/kerio-kvc.conf

• After any changes to this file, it is necessary to reload the configuration by executing the following command:

  # sudo /etc/init.d/kerio-kvc reload

How to Verify the Server's Certificate Fingerprint?

To make sure that the detected server's certificate fingerprint matches the desired server, take the following steps:

1. Open the Administration Console for a particular Kerio Control server.

2. Go to the Configuration / Interfaces section.

3. Open the VPN Server properties.

4. Compare the content of the Fingerprint field with the automatically detected certificate fingerprint from the VPN client side.
   
   
   
   

Starting / Stopping

Kerio Control VPN Client will be automatically started after installation and restarted after reconfiguration.

You can start/stop it manually by executing the following command:

# sudo /etc/init.d/kerio-kvc {start|stop|restart}

Once the Kerio Control VPN client is started, the Status -> VPN clients section will show Connected status.

For more information, please refer to Monitoring VPN clients.

Uninstallation

To uninstall Kerio Control VPN Client, remove the installed package by executing the following command:

# sudo apt-get remove kerio-control-vpnclient

 To uninstall Kerio Control VPN Client completely with configuration removal, execute the following command:

# sudo apt-get remove --purge kerio-control-vpnclient

Information on Log Files

Kerio Control VPN Client creates the following log files in the /var/log/kerio-kvc directory:

init.log - provides information on starting and stopping the daemon.

error.log - includes information on critical errors.

debug.log - contains more detailed status and error messages.

Related Articles

Installing and Configuring Kerio Control VPN Client on Windows

Configuring Kerio Control VPN Client in OS X

Back to Top