Overview

The DHCP protocol assigns IP addresses. Apart from these addresses, you can also send additional parameters via the DHCP protocol. Parameter 66 configures the TFTP server address.

 

Back to top

---

 

Process

1. In the Administration interface, navigate to the Configuration > DHCP server section.
2. If you use the automatically generated scopes, use Click to configure scopes manually.
3. Select a scope and open its settings (the Edit Scope dialog).
4. Click on the Add button.
   
   
   
   
5. Add parameter 66.
6. Enter a public IP address through which the Kerio Operator communicates.

 

Back to top

---

 

Confirmation

Parameter 66 is set in the DHCP server.

 

Back to top

---