Overview

This article shares the process of changing the number of retries and their delay settings for sending faxes in GFI FaxMaker.

Solution

1. Go to Start > Programs > GFI FaxMaker.
   
   
2. Open GFI FaxMaker Configuration.
   
   
3. Navigate to Lines/Devices, right-click, and select Properties.
   
   
4. On the General tab, select the intended sending line (to edit), and click on the Properties.... button.
   
   
5. On the Line options tab:
   
   
   1. Edit the Number of retries variable to the intended retry setting. A value of 0 will not retry the fax and the transmission report will be immediately sent if the fails for any reason. 
      
      
   2. Edit the retry delay variable to the number of seconds you would like FaxMaker to wait to send a retry when a busy tone is received when attempting to send a fax.  Example: 300 seconds = 5 minutes. 
      
      
      Note: If three retries are selected, the fax will be attempted four times.

      
      
      

6. Click the OK button.
   
   
7. Now, click the OK button under the General tab of Lines/Devices Properties.
   
   
8. Close GFI FaxMaker Configuration and restart the GFI FaxMaker services for the new changes to take effect.

Confirmation

Once changed, send a fax to a number that is known to fail (for example, a cell phone number), and count the retries before the transmission report is delivered to ensure it is consistent with the settings.