Overview
A GFI FaxMaker Fax over IP implementation enables fax communications to be transmitted over the IP network rather than over long-distance lines. FoIP also eliminates the need for analog fax cards and devices, enabling GFI FaxMaker to be installed in a virtual environment such as:
- Microsoft Hyper-V
- Microsoft Virtual Server
- Microsoft Virtual PC
- VMware
Use a supported FoIP solution to integrate GFI FaxMaker with a digital telephony infrastructure. The FoIP solution may be configured to communicate with a VoIP PBX, a session border controller, a media gateway or directly to a hosted SIP trunk provider. These systems then communicate with the public switched telephone network (PSTN) to transmit or receive fax calls.
Information
GFI FaxMaker supports the following FoIP solutions:
FoIP Solution |
Description |
---|---|
TE-SYSTEMS XCAPI |
XCAPI is a software-only Fax over IP (FoIP) solution from TE-SYSTEMS. The XCAPI installer is pre-packaged with GFI FaxMaker and no additional downloads are required. For more information refer to Installing and Configuring GFI FaxMaker with XCAPI. |
Dialogic Brooktrout SR140 |
The Brooktrout SR140 is a software-only Fax over IP (FoIP) solution from Dialogic Technology. The Dialogic Brooktrout SR140 installer is pre-packaged with GFI FaxMaker and no additional downloads are required. For more information refer to Installing and Configuring Brooktrout SR140 (FoIP). |
Dialogic (Eicon) Diva Server SoftIP |
Dialogic Diva Server SoftIP for SIP is a software application from Dialogic Technology for IP telephony environments. To use this software with GFI FaxMaker, install and configure Dialogic Diva Server SoftIP. After configuration, add ISDN, PRI, and CAPI 2.0 lines in GFI FaxMaker. For more information refer to Fax Lines. |
Dialogic Brooktrout TR1034 models with the built-in network card for FoIP | Use a Dialogic Brooktrout TR1034 device that includes a built-in network card for FoIP. Install the Dialogic Brooktrout TR1034 drivers that are included with GFI FaxMaker and use the Brooktrout Configuration Tool to configure IP call settings. |
Priyanka Bhotika
Comments