Articles

For issues dealing with the Brooktrout configuration, licensing and devices

• Configuring Brooktrout SR140 for Use With T38Fax.com

  Overview The Brooktrout® SR140 is a software-only Fax over IP (FoIP) solution from Dialogic Technology. This article serves as a guide for configuring a T38Fax.com SIP trunk for use with the Dialogic®...

• Installing and Configuring a Dialogic Brooktrout TR1034 Series Fax Device in GFI FaxMaker

  Overview This article provides the process to install and configure a Dialogic Brooktrout TR1034 Series Fax Device in GFI FaxMaker. Please note that: Dialogic no longer supports any SDK prior to 6.7.0...

• Removing the Brooktrout Dependency from the FaxMaker Fax Server Service

  Overview When FaxMaker is installed, and the Brooktrout drivers are installed, a dependency is set as well. This means that if the Brooktrout service is not running or started, then the GFI FaxMaker F...

• Setting up a Brooktrout Card with a Network Interface (1N) for Fax over IP (FoIP)

  Overview This article describes the process of installing and configuring a Brooktrout card with a network interface adapter. This will be any card with 1N at the end of the model number (i.e., TR1034...

• Configuring Brooktrout SR140 with Different Phone Systems

  Overview This article shares the PDF guides for configuring Brooktrout SR140 Fax over IP (FoIP) software with the most commonly requested phone systems.  Note: For the complete listing, go to the Dial...

• Verifying Brooktrout Configuration After Upgrade/Migration

  Overview After an upgrade or migration when using a Brooktrout SR140, you find that all of your faxes are failing.  This article will provide instructions for verifying your Brooktrout SR140 configura...