Overview

By default, routes to all local subnets at the VPN Server's side are already defined. This article describes how to set custom routes to connect to other networks.

Solution

1. In the Administration interface, navigate to Interfaces.
2. Double-click the VPN Server.
   
   
   
   
3. On the Kerio VPN tab, click on Custom Routes...
   
   
   
   
4. Click on Add...
   
   
   
   
5. In the Add Route dialog box, define a network, mask, and a description.
   
6. Click the OK button to save the settings.

Note: Use the 255.255.255.255 network mask to define a route to a specific host. It can be helpful when adding a route to a host in the demilitarized zone at the VPN Server's side.

Back to top