How to use the Dialogic Brooktrout TR1034 diagnostic tool

Answer

• Dialogic no longer supports any SDK prior to 6.7.0
• Microsoft Windows Server 2003 is supported by GFI FaxMaker but IS NOT supported by Dialogic for SDK 6.7.x

1. Stop all of the GFI FaxMaker services
2. Download the file:

• https://www.dialogic.com/support/os/dld4.aspx?file=1917/fdtool-675.zip (for use with the 6.7.5 drivers) (What FaxMaker, version 19 and version 20.0 uses)
  -or-
• ftp://ftp.dialogic.com/fdtool6.11/ (for use with the 6.11 drivers) (What FaxMaker version 20.1 uses)
• This is from Dialogic's FTP site and authentication is required:

         user name: cust 
         password: place2cust

• Note: It is necessary to use the correct Diagnostic which correlates to the driver version in use. To verify the currently used drivers, review add/remove programs to find TR1034 drivers.

1. Extract the downloaded zip file to an accessible location
2. Run FDtool.exe
3. When the program is opened, there should be several buttons at the top.  Click the Configure button first to open the Brooktrout configuration tool
4. Click Advanced in the bottom right corner
5. If an analog card is in use, click Apply, then close the configuration tool and it should navigate back to the diagnostic tool
6. If a digital card is in use, apply the appropriate telephony settings with the card (If unsure, it may be necessary to contact the telco provider). Click Apply, then close the configuration tool and it should navigate back to the diagnostic tool.
7. Select the card to test from the drop-down and press Initialize.
8. The status for the lines should change to Waiting for call.
9. Click Tools, then select Debug (ignore the warning).
10. To test sending, type a number into the Dialstring field and press Dial (It may be necessary to hit Enter after entering the number). 
11. Test receiving by calling one of the internal fax lines from a fax machine

1. Zip up the folder ..\fdtool-...\logs\
2. Open ..\fdtool-...\config\ and find btcall.cfg and callctrl.cfg and add them to logs.zip
3. Email the numbers used to test and logs.zip back to GFI
   • If Fax-Over-IP/FOIP is in use (example device: SR140), please also run Wireshark during an attempt to re-create the issue, and provide a .pcap capture file for review. This .pcap capture file should be included in the logs.zip file. The Wireshark Utility can be found at: http://www.wireshark.org/
     • ​How to use Wireshark to capture network traffic

1. Open ..\Program Files\GFI\FaxMaker\Brooktrout\TR1034\boston\config
2. Back up btcall.cfg and callctrl.cfg
3. Open ..\fdtool-...\config\
4. Find btcall.cfg and callctrl.cfg and copy them to Program Files\GFI\FaxMaker\Brooktrout\TR1034\boston\config\
5. Be sure to edit the btcall.cfg file to show the absolute path of the callctrl.cfg file found under the brooktrout directory, once copied (not the Diag directory). To modify this file, open it with notepad and edit.
6. Start the GFI FaxMaker services and test