Phone Lines icon GFI Support Home Sign in
Start a conversation
  1. GFI Support
  2. GFI Support - Interface
  3. Articles

Exinda CLI: WCCP

Overview

 

This article provides information regarding the Exinda CLI command wccp.

You can use the wccp command to configure WCCP (Web Cache Communication Protocol) on the appliance. WCCP allows for out-of-path application acceleration.

 

Information

 

NOTE:  The following syntax convention is used:
  • {}: Options are enclosed in braces and are separated by '|'
  • []: Optional keywords are enclosed in brackets
  • <>: User input is required where variables are enclosed in greater-than and less-than symbols

 

The following list describes the commands used for performing common actions related to wccp:

Action Description

Command

 Parameter Description

To assign an interface to use for WCCPv2 traffic

 wccp interface <interface> Not Available

To configure WCCP services

wccp service <service group (1-99)> {assignment|group-address|password|router}

  • assignment {HASH|MASK} - Set the assignment type of the service group

  • group-address <multicast-address> - configure the multicast address for sending WCCPv2 messages to

  • password <password (1-8 characters)> - Configure the password used by the service group

  • router <address> - Configure the routers in the service group

 

Find more CLI commands.

Back to Top

 

Choose files or drag and drop files
Was this article helpful?
Yes
No

  1. Priyanka Bhotika

  2. Posted
  3. Updated

Comments