Overview

This article provides the steps to configure the XCAPI with babyTEL.

[Note: Please ensure that you are on XCAPI version 3.3.243 or higher. The latest XCAPI version can be downloaded from TE-Systems community download site].

Environment

• GFI FaxMaker
• TE-Systems XCAPI

Process 

[Note: Access to this site does require registration through TE-Systems].

1. Launch the XCAPI Configuration: Start > All Programs > XCAPI > XCAPI Configuration
   
2. Switch to Expert View: View > Expert View.
3. Select Controller in the configuration tree.
4. On the far right of the window, select New.
5. Select Add Voice-over-IP controller (VoIP), then Next.
6. Select the correct interface to be used for VoIP traffic, then Next.
7. Select SIP Provider, then Next.
8. In the list of providers choose babyTEL, then Next.
9. Fill in the requested information as provided in your babyTEL registration document, click Next.
   
10. Specify the number of lines/channels, you will be using, then click Next. 
11. Select Finish.
12. Save the Configuration and restart the GFI FaxMaker services.