Articles

Microsoft Solutions - Readiness Assessment

• Acceleration Compatibility Between ExOS Version 6 and 7

  Overview When upgrading firmware from version 6.4.x to 7, there have been some changes made regarding acceleration which could cause incompatibility issues. So, if upgrading devices in stages, it is p...

• Downloading Large Files and High CPU Usage on Router While Acceleration Is Enabled

  Overview This article provides the details regarding the relation between download file size and CPU usage when acceleration is enabled.  Information When acceleration is enabled, and the Exinda is pr...

• Acceleration on MAPI Traffic Not Working Due to Misclassification

  Overview Some MAPI users notice that their Outlook Traffic is not being classified as MAPI. If this traffic is not classified as MAPI chances are that if they are attempting to accelerate it, the MAPI...

• Acceleration Throughput

  Overview This article provides details about the acceleration bandwidth mentioned in the license. Information In license Exinda 3862 (30/20Mbps - HP), max acceleration bandwidth is 20Mbps; and it defi...

• ACPI Warning Logs During Bootup

  Overview A customer may report that while reviewing their logs, the following errors are present: Kernel: ACPI: Warning: 0x00000000000004000-0x000000000000401f SystemIO conflicts with Region \_SB_PCI0...

• Meaning of Each of the Acceleration Types Available

  Overview This article provides details on the different types of reductions that you can choose from in a policy. Information When you select Acceleration in a policy, you see a section for WM Reducti...

• Syncing the Active Directory Integration Once But Never Again

  Overview When using the AD Integrator with v7.0.3 of the Exinda firmware, it is possible to see that the AD Connector will sync with AD correctly upon an initial connection but then will not sync agai...

• Active Directory usernames not mapping to IP addresses

  OverviewAfter setting up the AD connector to show the usernames of the users which are using hosts on the network, there may be missing configuration which causes usernames to not map with their IP ad...

• Active Hosts in DVCs accumulate until reboot

  SummaryIn some scenarios, it can be seen that the number of active hosts in a DVC will increment and will never return to zero, even if there is no one using the network at the time. OverviewIn v7.4 a...

• AD Connector Crashes with Error "The server does not support the control. The control is critical."

  SummaryWhen using the AD Connector for the Exinda, it is possible to see repeated crashes of the AD Connector Service on the Windows Server with the log error The server does not support the control. ...