Start a conversation

Articles

Microsoft Solutions - Readiness Assessment

  • Standby/Bypass Mode While Installing New NIC

    Overview The customer wants to know if Exinda can be plugged into the network, and can be powered down to install an additional fiber card (Network Interface Card (NIC)). This article provides the nec...

  • Start, Stop and Restart Optimizer via CLI

    Overview This article contains the commands can be used to start, stop and restart the Optimizer via CLI. Information The following are the commands that can be used to start, stop and restart the Opt...

  • PDF Report Creation Process

    Overview PDF reports can be generated and downloaded on demand or can be generated and emailed at scheduled intervals. The content of the PDF reports can be configured in two ways: By exploring the da...

  • Strange logs referring to Bug 11206 About SNMP Monitoring

    SummaryIn the Exinda logs, a series of strange notices from the process 'mgmt' are found, starting with a log message referring to Bug 11206 and then technical messages following. While this happens, ...

  • System Disk Full /Var/Data/Monitor

    Overview Dashboard System Health shows the following warning: System Disk Full /var/data/monitor This warning indicates that there is a lot of data under /var/data/monitor and it does not have enough ...

  • System Event on Exinda: Appliance License Will Expire Soon

    Overview Exinda Alerts are emails sent to the defined system administrator when certain events on the Exinda appliance are triggered. They can be hardware events, software events related to the firmwa...

  • TACACS Authentication for Exinda

    Overview This article shows how TACAS Authentication can be set up for Exinda.   Resolution  Ensure TACACS+ is selected as an Authentication Method on the AAA page. Click System > Authentication and s...

  • TCP ports and options related to Acceleration

    SummarySome specifics regarding acceleration port requirements Overview Acceleration requires certain ports to be allowed between the communicating Exinda devices. If there are any issues with acceler...

  • NIC Driver tg3 Timed Out

    Overview This article covers a resolution for an unexpected shutdown due to tigon3(tg3) NIC drivers issue. These are drivers for the NIC cards in some Exindas. The logs show lots of messages relating ...

  • Graph on the Dashboard Spikes Above Allocated Bandwidth

    Overview When looking at the Dashboard at a glance, there is a graph that shows the throughput over time of the inbound and outbound direction through the Exinda. This is a handy way to take a quick l...